Latest Jul 16, 2022 Real NS0-194 Exam Dumps Questions Valid NS0-194 Dumps PDF
Network Appliance NS0-194 Exam Dumps - PDF Questions and Testing Engine
NEW QUESTION 62
An administrator notices that the clustered Data ONTAP 8.2.3 controllers are less responsive than normal. You use On Command Performance Manager but do not see obvious problems, yet, this particular issue is constant. Users are starting to complain.
Which tool would you use to collect data to help diagnose this issue?
- A. Perfstat
- B. Perfmon
- C. Performance Archive
- D. Auto Support
Answer: B
NEW QUESTION 63
A customer is showing disk utilization is at 100% in Active IQ even though there are low protocol operations on the controller. You review the data shown in the exhibit.
In this situation, what should you do?
- A. Replace disks 6b.34 and 6a.19.
- B. Add disks to the aggregate to bring down the average utilization.
- C. Replace disk 6b.39.
- D. Reseat shelf module B.
Answer: C
NEW QUESTION 64
When you expend an aggregate, the space partition can be added as only a new RAID group, even though the current RAID group size is large enough for the current and new partitions.
In this scenario, which statement is correct?
- A. The partitions to be added share disks with the partition in the existing group.
- B. RAID group size is used only when dealing with non-partitioned disks.
- C. Only nonpartitioned disks can be added to RAID group with existing partitions.
- D. The aggregate must be converted to RAID-TEC to expand RAID groups using partitions.
Answer: A
NEW QUESTION 65
Referring to the exhibit.
The customer configured an SVM called "NewSVM" for NFS, configured the volume, "vol_nfs", mounted at "/vol_nfs", and set up NFSv3 as shown in the exhibit.
However, if they try to mount from the client with IP address 192.168.10.10, they receive a "permission denied" error. In this scenario, which action will solve the error condition?
- A. Configure the default route for NewSVM correctly.
- B. Stop and start NewSVM.
- C. Associate a correct export policy to the root volume(/) of NewSVM.
- D. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
Answer: B
NEW QUESTION 66
Your customer has a 2-node cluster with two FAS2554 controllers running clustered Data ONTAP 8.3. You want to upgrade non-disruptively to clustered Data ONTAP 8.3.1 using the rolling-upgrade method.
Which two operations would you perform before issuing the A storage failover takeover - of node NodeA- command? (Choose two.)
- A. Change the default boot image to the new image.
- B. Migrate all LIFs used for iSCSI and FC away from NodeA.
- C. Install the new software image on all nodes.
- D. Upgrade the service processor of all nodes.
Answer: D
NEW QUESTION 67
You are asked to replicate 15 of 20 volumes and the network configuration of your storage virtual machine to your other data center.
In this scenario, which NetApp technology should you use?
- A. MetroCluster
- B. SnapMirror Synchronous
- C. SVM DR
- D. SVM peering
Answer: B
NEW QUESTION 68
For testing purposes, your customer decides to use FC on a single-node ONTAP cluster. There is only one host that the customer expects to use. High availability is not a concern for this test. The customer connects the host directly to the ONTAP node. The LUN is set up, and the igroup is configured. When the customer tries to attach to the LUN from the host, the LUN is not seen by the host.
Which statement is correct in this scenario?
- A. An FC switch must be used with ONTAP.
- B. Multipathing must be used and connected to another FC path.
- C. NPIV must be enabled on the host before trying to attach to the LUN.
- D. NPV must be enabled on the host before trying to attach to the LUN.
Answer: D
NEW QUESTION 69
Which statement is true about a switchless cluster?
- A. A switchless cluster can support up to one node per cluster port.
- B. A switchless cluster can only be used for a system with two controllers in one chassis configuration.
- C. Converting a switchless cluster to a switched cluster is disruptive.
- D. In a switchless cluster, the network options switchless-cluster -enabled parameter must be set to true.
Answer: D
NEW QUESTION 70
You receive an AutoSupport notification because of the error shown below. "HA GROUP ERROR: DISK/SHELF COUNT MISMATCH ERROR."
In this scenario, which two steps would you take to solve the problem? (Choose two.)
- A. You should review the /etc/messages log.
- B. You should perform a failover and a giveback to clear the error.
- C. You should examine the IOM modules for error lights and reseat.
- D. You should power cycle all the disk shelves to clear the error.
Answer: A,D
NEW QUESTION 71
A hosting company is about to deploy a Microsoft Hyper-V environment connected to NetApp storage. They want to know which version of SMB and Data ONTAP should be deployed in this environment that supports continuously available shares.
In this scenario, what do you tell the customer?
- A. clustered Data ONTAP and SMB 2.1
- B. Data ONTAP /Mode and SMB3
- C. Data ONTAP 7 Mode and SMB 2.1
- D. clustered Data ONTAP and SMB 3
Answer: D
NEW QUESTION 72
What are two supported cabling methods for a NetApp HCI compute node? (Choose two.)
- A. 1-cable configuration
- B. 4-cable configuration
- C. 2-cable configuration
- D. 6-cable configuration
Answer: C,D
NEW QUESTION 73
A customer has a company -wide power outage scheduled and needs to gracefully power off a 2-node cluster. In this scenario, which two steps should be performed? (Choose two.)
- A. Use OnCommand system Manager to half the controllers.
- B. Use the half -node * command
- C. Use the halt -node -skip-lif-migration-before-shutdown true -inhibit-takeover true command.
- D. Invoke and AutoSupport message to indicate aplanned maintenance time.
Answer: C,D
NEW QUESTION 74
A storage administrator explains that when he enabled a virus scan on a clustered Data ONTAP 8.3.2 SVM "svm1" at 8:00 a.m. BST this morning, all CIFS share user access was impacted and customers reported receiving "access denied" errors. After the storage administrator disabled the virus scan on "svm1", user access was restored 30 minutes later.
Now the storage administrator wants to know the root cause of the problem. When you begin collecting event management system (EMS) logs, you discover the errors shown in the exhibit.
What was the root cause of the outage after the virus scan was enabled on "svm1"?
- A. The IP address (172.16.16.74) attempting to connect to the privileged ONTAP_ADMIN$ share is not found in the list of allowed IP addresses.
- B. Virus scan is enabled on the wrong SVM.
- C. The logged-in user (domain\\vscan_admin1) attempting to connect to the privileged ONTAP_ADMIN$ share is not found in the list of allowed users.
- D. Symantec Protection Engine is not one of our supported virus scan vendors.
Answer: B
NEW QUESTION 75
You are asked to replicate 15 of 20 volumes and the network configuration of your storage virtual machine to your other data center.
In this scenario, which NetApp technology should you use?
- A. MetroCluster
- B. SnapMirror Synchronous
- C. SVM DR
- D. SVM peering
Answer: B
Explanation:
Explanation/Reference: https://www.netapp.com/pdf.html?item=/media/19369-tr-4832.pdf
NEW QUESTION 76
Referring to the exhibit.
The exhibit shows an overview of a customer's network design. The customer is experiencing ping loss. As part of the troubleshooting process, you receive output by using the if grp status command from the node shell.
In this scenario, what is the customer's problem?
- A. Virtual LANs (VLANs) are not used, which causes the interfaces to be overloaded.
- B. Virtual interface (VIF) is deprecated in clustered Data ONTAP because the interface group is not working as it should.
- C. Link aggregation is not active on the switch, despite being in the design.
- D. The interface group on the controller is not using the default type, causing a connection mismatch with the switch.
Answer: B
NEW QUESTION 77
What is the next step if you must escalate an open case?
- A. Call NetApp Support and open a new case.
- B. Upload the support case and core data files to NetApp Suport and to Engineering.
- C. Call NetApp Support and ask to speak to the duty manager.
- D. Clustered Data ONTAP triggers the AutoSupport mechanism automatically again.
Answer: C
NEW QUESTION 78 
In the AFF A200 shown in the exhibit, which port is a CNA port?
- A. e0a
- B. |0|0|
- C. 0a
- D. e0c/0c
Answer: D
Explanation:
Explanation/Reference: https://docs.netapp.com/platstor/topic/com.netapp.doc.hw-2700-install-setup/GUID-FE4BD3C8-
3DB4-438A-A5CE-FEEF74AE8BAF.html
NEW QUESTION 79
Which two statements are true about epsilon in a 4-node cluster? (Choose two.)
- A. Epsilon is automatically assigned to the last node added to a cluster.
- B. Epsilon is used as a tie-breaker for determining a quorum.
- C. Epsilon is authentically assigned to the first node when a cluster is created.
- D. Epsilon is used for determining the up node in failover.
Answer: B,C
NEW QUESTION 80
Referring to the exhibit.
The customer configured an SVM called "NewSVM" for NFS, configured the volume, "vol_nfs", mounted at "/vol_nfs", and set up NFSv3 as shown in the exhibit.
However, if they try to mount from the client with IP address 192.168.10.10, they receive a "permission denied" error. In this scenario, which action will solve the error condition?
- A. Configure the default route for NewSVM correctly.
- B. Stop and start NewSVM.
- C. Associate a correct export policy to the root volume(/) of NewSVM.
- D. Add a rule to the default export policy to Include the -clientmatch 192.168.10.0/24 parameter.
Answer: B
NEW QUESTION 81
You have a 4-node MetroCluster system. A node needs to be taken down for maintenance, but all data needs to remain online.
In this scenario, what should you do to bring down a single node?
- A. Disable HA on each side of the MetroCluster.
- B. Perform an HA takeover of the node.
- C. Perform an aggregate relocation of the CFO aggregates on the node.
- D. Perform a MetroCluster switchover.
Answer: B
NEW QUESTION 82
You want to use the supported method to upgrade the ONTAP version of a Cloud Volumes ONTAP instance from ONTAP 9.5 to ONTAP 9.6.
In this scenario, which NetApp tool accomplishes this task?
- A. ONTAP System Manager
- B. Active IQ Unified Manager
- C. Cloud Manager
- D. Cloud Insights
Answer: A
NEW QUESTION 83
Exhibit:
You are attempting a storage giveback, but the process does not finish successfully. Referring to the exhibit.
What is the problem?
- A. There are active CIFS or NFSv4 connections.
- B. The giveback failed on the node root aggregate.
- C. There are active cluster -02 was not ready for giveback.
- D. An aggregate has failed.
Answer: A
NEW QUESTION 84
You want to set up a FabricPool between an ONTAP cluster and Google Cloud Storage.
In this scenario, which two components are required to accomplish this task? (Choose two.)
- A. intercluster LIFs
- B. a Certificate Authority (CA) certificate
- C. a service account access key
- D. an Express Route
Answer: A,B
NEW QUESTION 85
When a write from a SAN host is received, the information is written within a storage controller before going to RAID.
In this scenario, which two main components are used? (Choose two.)
- A. NVRAM
- B. Flash Pool
- C. system memory
- D. Flex Cache
Answer: A,C
NEW QUESTION 86
What is the minimum number of compute nodes required to run the NetApp Deployment Engine for NetApp HCI?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 87
......
NetApp NS0-194 Exam Topics:
| Section | Objectives |
|---|---|
| Data Protection | -Identify data protection concepts -Demonstrate knowledge of data protection operations |
| NetApp Cloud Data Services | -Identify the components of cloud data services -Identify the components of a hybrid cloud solution |
| Troubleshooting NetApp Hardware and Software | -Demonstrate knowledge of how to collect and analyze information -Demonstrate knowledge of how to troubleshoot data access problems -Demonstrate knowledge of how to analyze performance |
| ONTAP OS | -Describe disk or aggregate concepts -Describe volume concepts -Describe ONTAP networking concepts -Describe how ONTAP interacts with external components -Identify ONTAP logging mechanisms -Describe supported ONTAP protocols |
NetApp NS0-194 Exam Certification Details:
| Recommended Training | Introduction to NetApp Storage System Basic Components (WBT) Introduction to Clustered Data ONTAP Architecture (WBT) Introduction to Aggregates and FlexVols in Clustered Data ONTAP (WBT) Introduction to Networking in Clustered Data ONTAP (WBT) Introduction to High-Availability in Clustered Data ONTAP (WBT) Introduction to Data Protection in Clustered Data ONTAP (WBT) |
| Sample Questions | NetApp NS0-194 Sample Questions |
| Exam Name | Support Engineer |
| Duration | 90 minutes |
| Number of Questions | 60 |
| Exam Price | $150 USD |
| Passing Score | 63% |
Reliable Network Appliance NCSE NS0-194 Dumps PDF Jul 16, 2022 Recently Updated Questions: https://www.testsimulate.com/NS0-194-study-materials.html
Latest NS0-194 Exam Dumps for Pass Guaranteed: https://drive.google.com/open?id=1GTbcHhu03y7wm7BDsCMNs0lFHHcK-2Nr