300-730 Free Study Guide! with New Update 100 Exam Questions

Get up-to-date Real Exam Questions for 300-730 UPDATED [2022]

NEW QUESTION 53
Which technology is used to send multicast traffic over a site-to-site VPN?

• A. GRE tunnel on ASA
• B. IPsec tunnel on FTD
• C. GRE over IPsec on FTD
• D. GRE over IPsec on IOS router

Answer: C

 

NEW QUESTION 54
Which two features are valid backup options for an IOS FlexVPN client? (Choose two.)

• A. need distractor
• B. HSRP stateless failover
• C. tunnel pivot
• D. DNS-based hub resolution
• E. reactivate primary peer

Answer: D,E

 

NEW QUESTION 55
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.

Answer:

Explanation:

 

NEW QUESTION 56
Where is split tunneling defined for IKEv2 remote access clients on a Cisco router?

• A. IKEv2 authorization policy
• B. virtual template
• C. Group Policy
• D. webvpn context

Answer: C

 

NEW QUESTION 57
Refer to the exhibit.

Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)

• A. VTI
• B. DMVPN
• C. crypto map
• D. FlexVPN
• E. GRE

Answer: A,B

 

NEW QUESTION 58
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?

• A. IKEv2 IKE_SA_INIT
• B. IKEv2 CREATE_CHILD_SA
• C. IKEv2 INFORMATIONAL
• D. IKEv2 IKE_AUTH

Answer: C

 

NEW QUESTION 59
A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?

• A. The vpnsession-db must be cleared manually.
• B. Configure a backup server in the XML profile.
• C. AnyConnect images must be uploaded to both failover ASA devices.
• D. AnyConnect client must point to the standby IP address.

Answer: C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ ha_active_standby.html

 

NEW QUESTION 60
Refer to the exhibit.

What is configured as a result of this command set?

• A. FlexVPN server for an IPv6 dVTI session
• B. FlexVPN server to authenticate IPv6 peers by using EAP
• C. FlexVPN server to authorize groups by using an IPv6 external AAA
• D. FlexVPN client profile for IPv6

Answer: D

 

NEW QUESTION 61
Which benefit of FlexVPN is a limitation of DMVPN using IKEv1?

• A. NHRP authentication provides enhanced security.
• B. GRE encapsulation allows for forwarding of non-IP traffic.
• C. Dynamic routing protocols can be configured.
• D. IKE implementation can install routes in routing table.

Answer: D

Explanation:
Section: Secure Communications Architectures

 

NEW QUESTION 62
Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)

• A. Add NHRP shortcuts on the hub.
• B. Add NHRP redirects on the hub.
• C. Add NHRP redirects on the spoke.
• D. Enable EIGRP next-hop-self on the hub.
• E. Disable EIGRP next-hop-self on the hub.

Answer: B,E

 

NEW QUESTION 63
While troubleshooting, an engineer finds that the show crypto isakmp sa command indicates that the last state of the tunnel is MM_KEY_EXCH. What is the next step that should be taken to resolve this issue?

• A. Verify that the ISAKMP proposals match.
• B. Correct the peer's IP address on the crypto map.
• C. Ensure that UDP 500 is not being blocked between the devices.
• D. Confirm that the pre-shared keys match on both devices.

Answer: B

 

NEW QUESTION 64
Refer to the exhibit.

A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?

• A. An authentication failure occurs on the router.
• B. UDP 4500 traffic from the peer does not reach the router.
• C. An authentication failure occurs on the remote peer.
• D. A certificate fragmentation issue occurs between both sides.

Answer: B

 

NEW QUESTION 65
Which feature of GETVPN is a limitation of DMVPN and FlexVPN?

• A. enabled use of ESP or AH
• B. design for use over public or private WAN
• C. sequence numbers that enable scalable replay checking
• D. no requirement for an overlay routing protocol

Answer: D

Explanation:
Section: Secure Communications Architectures

 

NEW QUESTION 66
Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?

• A. Client services are not enabled.
• B. The XML profile is not configured correctly for the affected users.
• C. The new client image does not use the same major release as the current one.
• D. Client software updates are not supported with IKEv2.

Answer: A

Explanation:
Section: Remote access VPNs

 

NEW QUESTION 67
Refer to the exhibit.

A network engineer is configuring a remote access SSLVPN and is unable to complete the connection using local credentials. What must be done to remediate this problem?

• A. Configure a AAA server group to authenticate the client.
• B. Change the authentication method to local.
• C. Enable the client protocol in the Cisco AnyConnect profile.
• D. Configure the group policy to force local authentication.

Answer: C

 

NEW QUESTION 68
Which method dynamically installs the network routes for remote tunnel endpoints?

• A. route filtering
• B. policy-based routing
• C. reverse route injection
• D. CEF

Answer: C

 

NEW QUESTION 69
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?

• A. EAP query-identity
• B. use of certificates instead of username and password
• C. EAP-AnyConnect
• D. AnyConnect profile

Answer: D

Explanation:
Section: Remote access VPNs
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html

 

NEW QUESTION 70
What are two functions of ECDH and ECDSA? (Choose two.)

• A. nonrepudiation
• B. encryption
• C. revocation
• D. key exchange
• E. digital signature

Answer: D,E

 

NEW QUESTION 71
Refer to the exhibit.

Which VPN technology is allowed for users connecting to the Employee tunnel group?

• A. IKEv2 AnyConnect
• B. crypto map
• C. SSL AnyConnect
• D. clientless

Answer: A

 

NEW QUESTION 72

Refer to the exhibit. A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?

• A. Correct the crypto access list on both Cisco ASA devices.
• B. Reduce the maximum SA limit on the local Cisco ASA.
• C. Remove the maximum SA limit on the remote Cisco ASA.
• D. Increase the maximum in-negotiation SA limit on the local Cisco ASA.

Answer: D

Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls

 

NEW QUESTION 73

Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile.
When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?

• A. The IP address is incorrect.
• B. UserGroup must match connection profile.
• C. The HostName is incorrect.
• D. Primary protocol should be SSL.

Answer: B

Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891

 

NEW QUESTION 74
What is a requirement for smart tunnels to function properly?

• A. Java or ActiveX must be enabled on the client machine.
• B. The user on the client machine must have admin access.
• C. Applications must be UDP.
• D. Stateful failover must not be configured.

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.html

 

NEW QUESTION 75

Refer to the exhibit. Which VPN technology is allowed for users connecting to the Employee tunnel group?

• A. IKEv2 AnyConnect
• B. crypto map
• C. SSL AnyConnect
• D. clientless

Answer: A

Explanation:
Section: Remote access VPNs

 

NEW QUESTION 76
Cisco AnyConnect clients need to transfer large files over the VPN sessions. Which protocol provides the best throughput?

• A. L2TP
• B. IPsec IKEv1
• C. SSL/TLS
• D. DTLS

Answer: D

Explanation:
Section: Secure Communications Architectures

 

NEW QUESTION 77
......

Cisco SVPN 300-730 Practice Test Questions, Cisco SVPN 300-730 Exam Practice Test Questions

The Cisco 300-730 exam is designed to measure the candidates’ knowledge and skills related to VPN solutions and implementation of secure remote communications. During the course of this test, the individuals will learn important skills, such as remote access VPN to create encrypted data, increase privacy, deploy and troubleshoot traditional Internet protocol security (IPsec), and more. This exam is associated with the Cisco CCNP Security certification.

What is the Cisco 300-730 Exam?

Implementing secure solutions with virtual private networks is key to modern operating environments, and the 300-730 Exam certifies the knowledge and skills necessary to build a secure infrastructure based on Cisco technologies. This certification also establishes mastery of device configuration, monitoring, diagnosis, and troubleshooting, as well as knowledge of network policies, security threats, and mitigation techniques.

All Details for 300-730 Test

The Cisco 300-730 SVPN - Implementing Secure Solutions with Virtual Private Networks exam consists of topics and domains related to Virtual Private Network (VPN) and includes concepts of communications security, architectures, and network troubleshooting. The candidate interested in giving this exam should have a thorough understanding of VPN and its implementation, configuration, and monitoring. Particularly, such a test is designed for those who have all the essential skills and knowledge on the concepts of IPsec, DMVPN, FlexVPN along with remote access VPN for creating secure data with a focus on privacy. The following certification exam consists of topics that need to be completed within 90 minutes. The Cisco 300-730 exam is a prerequisite for the CCNP Security and the Cisco Certified Specialist - Network Security VPN Implementation certifications. Also, such an exam is available in English and Japanese.

 

Pass Cisco 300-730 Exam in First Attempt Guaranteed: https://www.testsimulate.com/300-730-study-materials.html

Pass 300-730 Exam Latest Practice Questions: https://drive.google.com/open?id=1CaaXJb4Qq-w-TwZ9WxLUp8q5EbuIcEsg