300-710 Exam PDF [2023] Tests Free Updated Today with Correct 279 Questions

Cisco 300-710 Exam Preparation Guide and PDF Download

Cisco 300-710 exam is one of the certification exams offered by Cisco for professionals seeking to advance their skills in network security. 300-710 exam focuses on securing networks using Cisco Firepower, which is a comprehensive security suite that provides visibility, threat detection, and response capabilities. 300-710 exam is designed to validate the skills and knowledge of candidates in designing, configuring, and implementing Firepower solutions to secure networks against cyber threats.

Cisco 300-710 Exam covers a wide range of topics related to Cisco Firepower NGFW, including advanced firewall and VPN configurations, access control policies, security intelligence, and network analysis and troubleshooting. Candidates are also expected to have a deep understanding of threat detection and mitigation techniques, as well as best practices for implementing network security policies and procedures. Passing the exam requires not only a solid theoretical foundation but also practical experience in configuring and managing Cisco Firepower NGFW appliances in real-world environments.

Cisco 300-710 exam covers a wide range of topics related to network security, including Firepower management, Firepower NGFW architecture, access control policies, Firepower NGIPS, and Firepower SSL decryption. 300-710 exam also tests the candidate's ability to implement and troubleshoot Firepower solutions, as well as their understanding of various security technologies, such as VPNs, cryptography, and endpoint security. By passing the Cisco 300-710 exam, IT professionals can demonstrate their expertise in network security and gain recognition as a skilled security professional.

 

NEW QUESTION # 57

Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?

• A. The rule is configured with the wrong setting for the source port
• B. The rule must define the source network for inspection as well as the port
• C. The action of the rule is set to trust instead of allow.
• D. The rule must specify the security zone that originates the traffic

Answer: C

NEW QUESTION # 58
Which command is run at the CLI when logged in to an FTD unit, to determine whether the unit is managed locally or by a remote FMC server?

• A. show managers
• B. show configuration session
• C. show running-config | include manager
• D. system generate-troubleshoot

Answer: A

NEW QUESTION # 59
Which command is entered in the Cisco FMC CLI to generate a troubleshooting file?

• A. show running-config
• B. sudo sf_troubleshoot.pl
• C. show tech-support chassis
• D. system support diagnostic-cli

Answer: B

NEW QUESTION # 60
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)

• A. Both devices can be part of a different group that must be in the same domain when configured within the FMC.
• B. The units must be the same version
• C. The units must be different models if they are part of the same series.
• D. The units must be the same model.
• E. The units must be configured only for firewall routed mode.

Answer: B,D

Explanation:
Section: Deployment
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/firepower-management-center/212699- configure-ftd-high-availability-on-firep.html

NEW QUESTION # 61
In a multi-tenant deployment where multiple domains are in use. which update should be applied outside of the Global Domain?

• A. Cisco Geolocation Database
• B. local import of major upgrade
• C. minor upgrade
• D. local import of intrusion rules

Answer: A

NEW QUESTION # 62
An engineer has been tasked with providing disaster recovery for an organization's primary Cisco FMC.
What must be done on the primary and secondary Cisco FMCs to ensure that a copy of the original corporate policy is available if the primary Cisco FMC fails?

• A. Configure high-availability in both the primary and secondary Cisco FMCs
• B. Restore the primary Cisco FMC backup configuration to the secondary Cisco FMC device when the primary device fails
• C. Connect the primary and secondary Cisco FMC devices with Category 6 cables of not more than 10 meters in length.
• D. Place the active Cisco FMC device on the same trusted management network as the standby device

Answer: B

NEW QUESTION # 63
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)

• A. The BVI IP address must be in a separate subnet from the connected network.
• B. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
• C. Bridge groups are supported only in transparent firewall mode.
• D. Bridge groups are supported in both transparent and routed firewall modes.
• E. Each directly connected network must be on the same subnet.

Answer: D,E

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html

NEW QUESTION # 64

Refer to the exhibit. An engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network. How is the Firepower configuration updated to protect these new operating systems?

• A. The administrator requests a Remediation Recommendation Report from Cisco Firepower.
• B. The administrator manually updates the policies.
• C. Cisco Firepower gives recommendations to update the policies.
• D. Cisco Firepower automatically updates the policies.

Answer: C

Explanation:
Section: Management and Troubleshooting

NEW QUESTION # 65
A network administrator configured a NAT policy that translates a public IP address to an internal web server IP address. An access policy has also been created that allows any source to reach the public IP address on port 80. The web server is still not reachable from the Internet on port 80. Which configuration change is needed?

• A. The intrusion policy must be disabled for port 80.
• B. The access policy rule must be configured for the action trust.
• C. The access policy must allow traffic to the internal web server IP address.
• D. The NAT policy must be modified to translate the source IP address as well as destination IP address.

Answer: C

NEW QUESTION # 66
The event dashboard within the Cisco FMC has been inundated with low priority intrusion drop events, which are overshadowing high priority events. An engineer has been tasked with reviewing the policies and reducing the low priority events. Which action should be configured to accomplish this task?

• A. drop packet
• B. drop connection
• C. generate events
• D. drop and generate

Answer: C

Explanation:
Reference" https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/working_with_intrusion_events.html

NEW QUESTION # 67
An administrator is working on a migration from Cisco ASA to the Cisco FTD appliance and needs to test the rules without disrupting the traffic. Which policy type should be used to configure the ASA rules during this phase of the migration?

• A. Intrusion
• B. identity
• C. Prefilter
• D. Access Control

Answer: D

NEW QUESTION # 68
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?

• A. Child domains have access to only a limited set of widgets from ancestor domains.
• B. Child domains can view but not edit dashboards that originate from an ancestor domain.
• C. Child domains cannot view dashboards that originate from an ancestor domain.
• D. Only the administrator of the top ancestor domain can view dashboards.

Answer: C

Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html

NEW QUESTION # 69
An engineer is building a new access control policy using Cisco FMC. The policy must inspect a unique IPS policy as well as log rule matching. Which action must be taken to meet these requirements?

• A. Disable the default IPS policy and enable global logging.
• B. Configure an IPS policy and enable per-rule logging.
• C. Configure an IPS policy and enable global logging.
• D. Disable the default IPS policy and enable per-rule logging.

Answer: B

NEW QUESTION # 70
An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation. How will this issue be addresses globally in the quickest way possible and with the least amount of impact?

• A. by Isolating the endpoint
• B. by creating a URL object in the policy to block the website
• C. Cisco Talos will automatically update the policies.
• D. by denying outbound web access

Answer: C

NEW QUESTION # 71
Which command must be run to generate troubleshooting files on an FTD?

• A. sudo sf_troubleshoot.pl
• B. system generate-troubleshoot all
• C. system support view-files
• D. show tech-support

Answer: B

NEW QUESTION # 72
Upon detecting a flagrant threat on an endpoint, which two technologies instruct Cisco Identity Services Engine to contain the infected endpoint either manually or automatically? (Choose two.)

• A. Cisco FMC
• B. Cisco ASA 5500 Series
• C. Cisco AMP
• D. Cisco Stealthwatch
• E. Cisco ASR 7200 Series

Answer: C,D

NEW QUESTION # 73
In which two places can thresholding settings be configured? (Choose two.)

• A. per preprocessor, within the network analysis policy
• B. on each IPS rule
• C. globally, within the network analysis policy
• D. globally, per intrusion policy
• E. on each access control rule

Answer: B,D

Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa- firepower-module-user-guide-v541/Intrusion-Global-Threshold.pdf

NEW QUESTION # 74
Which command should be used on the Cisco FTD CLI to capture all the packets that hit an interface?

• A. capture
• B. capture WORD
• C. capture-traffic
• D. configure coredump packet-engine enable

Answer: C

Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/command_ref/ b_Command_Reference_for_Firepower_Threat_Defense/ac_1.html

NEW QUESTION # 75
An administrator is adding a QoS policy to a Cisco FTD deployment. When a new rule is added to the policy and QoS is applied on 'Interfaces in Destination Interface Objects", no interface objects are available What is the problem?

• A. The network segments that the interfaces are on do not have contiguous IP space
• B. A conflict exists between the destination interface types that is preventing QoS from being added
• C. The FTD is out of available resources lor use. so QoS cannot be added
• D. QoS is available only on routed interfaces, and this device is in transparent mode.

Answer: D

NEW QUESTION # 76
Which two statements about bridge-group interfaces in Cisco FTD are true? (Choose two.)

• A. The BVI IP address must be in a separate subnet from the connected network.
• B. Bidirectional Forwarding Detection echo packets are allowed through the FTD when using bridge-group members.
• C. Bridge groups are supported only in transparent firewall mode.
• D. Bridge groups are supported in both transparent and routed firewall modes.
• E. Each directly connected network must be on the same subnet.

Answer: D,E

NEW QUESTION # 77
An engineer is implementing Cisco FTD in the network and is determining which Firepower mode to use. The organization needs to have multiple virtual Firepower devices working separately inside of the FTD appliance to provide traffic segmentation Which deployment mode should be configured in the Cisco Firepower Management Console to support these requirements?

• A. multi-instance
• B. single-context
• C. multiple deployment
• D. single deployment

Answer: A

NEW QUESTION # 78
An engineer is tasked with deploying an internal perimeter firewall that will support multiple DMZs Each DMZ has a unique private IP subnet range. How is this requirement satisfied?

• A. Deploy the firewall in routed mode with access control policies.
• B. Deploy the firewall in routed mode with NAT configured.
• C. Deploy the firewall in transparent mode with access control policies.
• D. Deploy the firewall in transparent mode with NAT configured.

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/general/asa-96-general-config/intro-fw.h

NEW QUESTION # 79
A security engineer must deploy a Cisco FTD appliance as a bump in the wire to detect intrusion events without disrupting the flow of network traffic. Which two features must be configured to accomplish the task?
(Choose two.)

• A. inline set pair
• B. tapemode
• C. bridged mode
• D. passive interfaces
• E. transparent mode

Answer: B,E

NEW QUESTION # 80
......

Verified & Correct 300-710 Practice Test Reliable Source Dec 24, 2023 Updated: https://www.testsimulate.com/300-710-study-materials.html

Free Cisco 300-710 Exam Files Downloaded Instantly: https://drive.google.com/open?id=1BhCi7zNs3YJXFZG3zmveE3rGVrZWWVEL