100% Accurate Answers! Jun-2026 Workday-Pro-HCM-Reporting Actual Real Exam Questions
Best Value Available! 2026 Realistic Verified Free Workday-Pro-HCM-Reporting Exam Questions
Workday Workday-Pro-HCM-Reporting Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 25
You configured a trending report for an HR analyst that shows headcount by country trends by quarter. The HR analyst has asked for the data to display for each month, rather than each quarter.
How can you fulfill these requirements?
- A. Edit the Group by Time Period field in the report definition.
- B. Run the Maintain Trended Workers task and modify the Trending Period.
- C. Edit the field on the Column Grouping grid in the report definition.
- D. Add a report prompt that uses the Trending Period field.
Answer: A
Explanation:
When designing trending reports, the Group by Time Period field determines how the trended records are aggregated and displayed. By default, reports may show quarterly or annual rollups, but this can be easily adjusted to monthly without needing to reconfigure or regenerate trending data.
From the Workday documentation: "In trending reports, the Group by Time Period setting allows users to choose the granularity of the results, such as monthly, quarterly, or annually. This setting controls the display of data in charts and tables." Other options are less appropriate: editing the Column Grouping grid changes report layout but not trending intervals, using a prompt does not change aggregation, and running the Maintain Trended Workers task changes system-wide trending setup, not individual report display.
Thus, the correct approach is B. Edit the Group by Time Period field in the report definition.
NEW QUESTION # 26
A report writer needs to create a report and wants to ensure they are using a data source that provides optimized performance on large volumes of data they will generate.
What type of data source should the report writer use for the required data set?
- A. Trended
- B. Standard
- C. Indexed
- D. Targeted
Answer: C
Explanation:
Workday provides multiple types of data sources when creating reports. Among them, Indexed Data Sources are specifically designed for performance optimization on large data volumes. They allow faster retrieval and better scalability when working with high record counts, because they are pre-optimized for reporting and queries.
From the Workday Reporting guide:
"Indexed data sources provide optimized performance for large data volumes. These data sources are indexed on commonly used fields and are specifically designed to support high-performance queries." Thus, the correct choice is A. Indexed for ensuring performance with large datasets.
NEW QUESTION # 27
A composite report sorts output based on the last column in ascending order. You want the sort to be based on the second to last column in descending order.
Where do you make this change?
- A. Second to last column
- B. Dynamic data row
- C. Combine data row
- D. Report settings
Answer: A
Explanation:
In Workday composite reports, sorting behavior is controlled at the column level, not globally. Each column in a composite report can be configured with its own sort order (ascending or descending). When a composite report is sorting by the last column, it means that column has an active sort configuration applied.
To change the sort to the second to last column and set it to descending, you must edit that specific column's configuration and adjust the sort settings accordingly. Workday evaluates column sorting in sequence, and the active column-level sort determines the output order.
From the Workday HCM Reporting documentation:
"Composite reports support column-based sorting. Sorting is defined within the column configuration and determines the order in which results display."
"To change sort behavior, update the sort settings on the appropriate column." The other options are incorrect because dynamic data rows control layout flexibility, combine data rows merge subreport results, and report settings manage prompts and general options-not sorting logic.
NEW QUESTION # 28
You would like to create an advanced report that contains information about employees and their dependents.
Where can you go to identify the field that links the two business objects, Worker and Dependent?
- A. The business object's Related Actions > Reporting > Report Fields and Values
- B. The Related Business Object column of the Report Fields report
- C. The Related Business Objects tab of the Business Object Details report
- D. The Columns tab of a report definition
Answer: C
Explanation:
To connect multiple business objects in reporting, Workday provides the Business Object Details report. The Related Business Objects tab within this report shows how different business objects are linked (e.g., Worker to Dependent). This enables report writers to identify which fields connect the primary and secondary objects.
From the Workday Reporting documentation:
"The report data source provides the view into the primary business object. This object gives you access to class report fields as well as links to related business objects." Therefore, the correct answer is C. The Related Business Objects tab of the Business Object Details report.
NEW QUESTION # 29
Refer to the following scenario to answer the question below.
You have prepared the following matrix report for a recruiting manager.
The recruiting manager wants the rows to sort by Total Count, rather than Total Average Base Pay.
How can you adjust the report definition to address this requirement?
- A. Add a new row to the grid on the Sort tab.
- B. Adjust the Maximum Number of Rows value.
- C. Add a new row to the grid on the Filter tab.
- D. Reorder the rows in the Define the Field(s) to Summarize grid.
Answer: A
Explanation:
In Workday reporting, row ordering is controlled on the Sort tab of the report definition. If you want the rows in a matrix report to sort by a specific field (such as Total Count), you must add that field to the Sort tab. Filters limit records, and summarizations define metrics, but sorting rules are explicitly defined in the Sort configuration.
From the Workday Reporting documentation:
"Sort - Control the order to present and group data. You can specify options for subtotals, grand totals, and outlines. Add a row on the Sort tab to define sorting by a particular field." Therefore, to sort rows by Total Count instead of Total Average Base Pay, the correct step is C. Add a new row to the grid on the Sort tab.
NEW QUESTION # 30
Refer to the following scenario to answer the question below.
You have prepared the following matrix report for a recruiting manager.
The recruiting manager wants to dynamically refine the output results for various hiring sources and locations.
How can you achieve this?
- A. Include a Summarization Calculation.
- B. Configure Facet Filters.
- C. Include a Drill to Report Link.
- D. Configure a Field Values Group.
Answer: B
Explanation:
Matrix reports in Workday allow for grouping, summarization, and drill-through capabilities. To let managers dynamically refine report results at runtime, you configure Facet Filters. Facet Filters enable users to filter the report output interactively, without modifying the underlying definition.
From the Workday Reporting documentation:
"Matrix reports allow grouping and summarization of data. You can also configure facet filters so users can dynamically refine report results by selecting values such as Hiring Source or Location." Thus, the correct way to let the recruiting manager refine the output is D. Configure Facet Filters.
NEW QUESTION # 31
You want the ability to view every summarization in the composite report by Location.
What do you do?
- A. Include Location as a Detail Data field in one of the subreports.
- B. Include Location as a drillable field in all the subreports.
- C. Include Location as a Detail Data field in all the subreports.
- D. Include Location as a drillable field in one of the subreports.
Answer: C
Explanation:
In composite reports, summarizations are driven by Detail Data fields provided by each subreport. If you want to summarize results consistently by Location across the entire composite report, Location must exist as a Detail Data field in every subreport.
Workday requires this consistency because composite-level summarizations rely on common fields across all subreports. If Location is missing from even one subreport's detail data, Workday cannot reliably aggregate or align summarizations by that field.
From the Workday HCM Reporting documentation:
"To summarize composite report data by a specific field, that field must be included as detail data in all subreports."
"Drillable fields enable navigation but do not support composite-level summarization." Including Location as drillable only affects drill-down behavior, not summarization. Including it in only one subreport results in incomplete aggregation.
NEW QUESTION # 32
The Recruiting department requested a report that shows job applications by recruiting source, displayed through count and percent summaries that they can drill into to further analyze the data.
What report type fulfills these requirements?
- A. Advanced
- B. nBox
- C. Matrix
- D. Search
Answer: C
Explanation:
Workday offers several custom report types: Advanced, Matrix, Composite, Search, and Trending .
Advanced Reports: Allow sorting, filtering, grouping, totals, and charts but are not designed for percentage summarizations across grouped data.
Search Reports: Show search results based on facet filters, not suited for summarization and percentages.
nBox Reports: Used for displaying workers or positions across two dimensions (e.g., performance vs. potential).
Matrix Reports: Specifically designed for grouping data, applying summarizations (count, sum, percent), and drilling
NEW QUESTION # 33
An HR administrator shares a discovery board with a manager and gives the manager Can Edit permissions. The manager is able to open Drive and access the discovery board. However, upon opening the discovery board, the manager notices that there are placeholders for each visualization and the data does not display.
What permission does the manager need to view the data in the visualizations?
- A. The data source used in each visualization
- B. The Discovery Boards: Create domain
- C. Can View permissions on each visualization
- D. The Drive domain
Answer: A
Explanation:
Discovery boards in Workday Prism or Analytics rely on underlying data sources to populate visualizations. Even if the manager has Can Edit or Can View access to the discovery board itself, they still need access to the domains or data sources used in the visualizations. Without this, placeholders appear instead of data.
From the Workday binder: "Discovery boards enforce Workday security. Users must have access to the underlying data sources or domains to view data in visualizations, regardless of board permissions." Giving "Can View" permissions on the visualization object itself or Drive access only affects sharing, not data. Discovery Boards: Create allows building new boards, not data access.
Therefore, the manager must have A. The data source used in each visualization.
NEW QUESTION # 34
A compensation analyst would like a report that includes an Expected Deadline field that returns a date 60 days after the Bonus Approval Date field.
- A. Date Difference
- B. Increment or Decrement Date
- C. Format Date
- D. Build Date
Answer: B
Explanation:
Workday calculated fields allow users to manipulate dates, numbers, and text values. To calculate a new date based on an existing date field (e.g., Bonus Approval Date), you use the Increment or Decrement Date function. This adds or subtracts a defined number of days, months, or years from the source date.
From Workday Reporting documentation:
"Increment or Decrement Date - Returns a date that is a specified number of days, months, or years before or after the value of the source date field." Example: If the Bonus Approval Date is 01/01/2025, adding 60 days using this function would return 03/02/2025.
Thus, the correct choice is A. Increment or Decrement Date.
NEW QUESTION # 35
You have received a request for a new custom report that is similar to the Workday-delivered report Compare Workers, and you run the Workday Standard Reports report.
What information can you use to determine if you can copy Compare Workers to create a new custom report?
- A. You can access the report's Related Actions from the Report column.
- B. The report shows Yes in the Schedulable column.
- C. The report shows Report Writer in the Type column.
- D. The Description column is not empty for the report.
Answer: C
Explanation:
The Workday Standard Reports report lists all delivered reports and key attributes. Only standard reports created with the Report Writer tool can be copied and modified into custom reports. The "Type" column indicates whether the report is a Report Writer report.
From the Workday Reporting documentation:
"Workday delivers standard reports that are available for all customers. If necessary, you can copy many of the Workday-delivered reports created with the report writer to create a custom report and modify it as needed." Thus, the correct indicator is C. The report shows Report Writer in the Type column.
NEW QUESTION # 36
You are building a composite report that uses two subreports with different data sources. You are noticing duplicate prompts when you run your composite report.
How can you resolve this problem?
- A. Configure the same default value for each duplicate prompt.
- B. Select the Do Not Prompt at Runtime checkbox for the overlapping prompts in each subreport.
- C. Select the Do Not Prompt at Runtime for one of the duplicate prompts in the Report Settings.
- D. Configure a prompt set on the composite report in the Report Settings.
Answer: D
Explanation:
Duplicate prompts occur in composite reports when multiple subreports request similar or identical inputs, such as Company, Date, or Organization. The recommended and most scalable solution is to use a Prompt Set configured at the composite report level.
Prompt sets allow you to consolidate duplicate prompts into a single prompt, which is then mapped to the corresponding prompts in each subreport. This ensures a clean user experience and consistent filtering across all subreports.
From the Workday HCM Reporting documentation:
"Composite reports support prompt sets to consolidate duplicate prompts across subreports."
"Configure prompt sets in the composite report's Report Settings to eliminate redundant user prompts." The other options are not best practice: default values do not remove duplicate prompts, suppressing prompts reduces flexibility, and managing prompts individually in subreports defeats the purpose of composite-level control.
NEW QUESTION # 37
You need to create a matrix report that evaluates the effectiveness of recruiters on each region.
How can you ensure the report displays the percentage of hires for each recruiter in relation to all recruiters and regions?
- A. Create a calculated field using the Sum function on the Number of Hires summarization
- B. Select the Percent of Overall Total option on the Number of Hires summarization
- C. Create a Calculation summarization to show the percentage of hires for each region
- D. Use a Count summarization to aggregate all data at the row level
Answer: B
Explanation:
Matrix reports in Workday allow grouping of data, applying summarizations, and drilling into the summaries for deeper analysis . To calculate percentages relative to the overall total, Workday provides a built-in summarization option called "Percent of Overall Total." This option is applied to numeric summarizations like "Number of Hires." From the Workday Reporting Guide:
"Matrix reports allow you to group data, summarize the metrics for each grouping, and drill into the summarizations for further analysis."
"You can apply different summarizations such as Count, Sum, Average, and Percent of Overall Total on numeric fields." (Matrix Report Options - Workday Module 1 Binder) Therefore, to show the percentage of hires per recruiter relative to the grand total across recruiters and regions, you would select "Percent of Overall Total" on the Number of Hires summarization.
NEW QUESTION # 38
You are creating a custom report to calculate the monthly bonus for each worker in the sales department. The bonus is calculated as 10% of the total sales for the month. What calculated field function would return the monthly bonus for each worker?
- A. Sum Related Instances
- B. Arithmetic Calculation
- C. Evaluate Expression
- D. Lookup Related Value
Answer: B
Explanation:
The Arithmetic Calculation function is designed for mathematical operations such as addition, subtraction, multiplication, and division. In this scenario, the bonus equals 10% of monthly sales, so you need to multiply the sales field by 0.10.
The Workday documentation highlights: "Arithmetic Calculation - Creates a numeric field using mathematical operations performed on existing fields." . This makes it the ideal choice for payroll- and incentive-related calculations.
Other options are less relevant: Evaluate Expression is for logical or Boolean conditions, Lookup Related Value is for retrieving fields from related objects (not calculations), and Sum Related Instances aggregates multiple rows of data but does not directly calculate percentages.
Thus, the arithmetic calculation provides a straightforward and efficient way to compute bonuses dynamically in the report.
NEW QUESTION # 39
You need to filter a custom report to only return data on part-time employees.
To achieve this, what comparison type should you use when creating the filter?
- A. Prompt the user for the value and ignore the filter condition if the value is blank
- B. Prompt the user for the value
- C. Value specified in this filter
- D. Value from another field
Answer: C
Explanation:
When creating a custom report, filters restrict which data records are returned. Workday allows different comparison types for filters. The option "Value specified in this filter" lets you hard-code a condition (for example, Time Type = Part-Time), so the report consistently returns only part-time employees without requiring user input.
From the Workday Reporting documentation:
"Filter - Add conditions to filter the primary business object."
"Prompts - You can further narrow and refine your report results by having the user complete prompt fields before they run the report... or use value specified in this filter for fixed filtering." Therefore, the correct answer is C. Value specified in this filter.
NEW QUESTION # 40
A user needs to view additional data on the delivered Headcount By Job Profile report.
What should you recommend?
- A. Edit the standard report
- B. Create a custom report from scratch
- C. Export the standard report to a data warehouse
- D. Copy and modify the standard report
Answer: D
Explanation:
Workday delivers many standard (delivered) reports that are available to all customers. These reports are a great starting point but are not editable directly. If the delivered report does not meet your requirements, you should copy it and then modify the copy to create a custom report. This ensures that you retain the delivered report as-is, while still tailoring the report output to your business needs.
From the Workday Module 1 and 2 Reporting sections:
"Workday delivers standard reports that are available for all customers. If necessary, you can copy many of the Workday-delivered reports to create a custom report and modify it as needed."
"There still may not be a report that meets my specific needs though. In that case, I can either create a report from scratch or copy a delivered report and make changes."
"Standard reports are already available in all customer tenants and span across the functional areas in Workday. Workday creates standard reports using either the report writer tool or XpressO. However, you can copy and modify reports created with report writer as needed." Therefore, the correct recommendation is to copy and modify the delivered Headcount By Job Profile report (Option D) instead of editing the original.
NEW QUESTION # 41
A composite report sorts output based on the last column in ascending order. You want the sort to be based on the second to last column in descending order.
How do you make this change?
- A. Update the report settings.
- B. Edit the second to last column.
- C. Create a dynamic data row.
- D. Edit the combine data row.
Answer: B
Explanation:
Sorting in composite reports is determined at the column level, not at the combine row or general report settings. If the output currently sorts by the last column, that is because the sort option was applied there. To change the sorting behavior to the second-to-last column and in descending order, you must edit that specific column's configuration.
From the Workday binder: "Composite reports allow sorting based on columns. To change sorting behavior, adjust the column configuration, specifying ascending or descending order." The other options are incorrect: "combine data row" merges subreport outputs, not sorting; "dynamic data row" generates flexible rows but doesn't control sorting; and "report settings" manage prompts and scheduling, not output order.
Therefore, the correct action is B. Edit the second to last column.
NEW QUESTION # 42
The benefits manager position has recently been filled by a different worker. The previous benefits manager has transferred ownership of the report schedules to the new manager. Month end is coming up and the new manager is wondering which reports are scheduled to be run automatically.
Where can the manager view this information?
- A. My Reports Library
- B. The Scheduled Future Processes report
- C. My Tasks
- D. The Process Monitor report
Answer: B
Explanation:
Workday provides the Scheduled Future Processes report to review which reports are scheduled to run automatically. This report displays the recurrence details and execution times of all scheduled reports, allowing managers to confirm upcoming automated report runs.
From the Workday Reporting documentation:
"Workday provides scheduling options to run reports at set frequencies. You can confirm upcoming scheduled report runs in the Scheduled Future Processes report." Therefore, the correct answer is D. The Scheduled Future Processes report.
NEW QUESTION # 43
You have a Pivot Table visualization in your discovery board.
What type of report will Workday create if you generate a report from this visualization?
- A. Advanced Report
- B. Matrix Report (with only a table)
- C. Matrix Report (with a chart and a table)
- D. XpressO
Answer: B
Explanation:
In Workday Discovery Boards, visualizations such as pivot tables are based on summarized and grouped data. When you choose to generate a report from a Pivot Table visualization, Workday converts the visualization into a Matrix Report that includes only a table, preserving the row and column groupings and summarizations used in the pivot.
The Workday HCM Reporting documentation states:
"When generating a report from a pivot table visualization, Workday creates a matrix report that reflects the grouped and summarized structure of the pivot."
"Charts are not included when generating reports from pivot table visualizations; the output is a table-only matrix report." Advanced Reports are generated from non-pivot, row-based visualizations. XpressO is not used for discovery board-generated reports. Matrix reports with charts are created only when the visualization includes a chart component, which pivot tables do not.
Therefore, the correct answer is B. Matrix Report (with only a table).
NEW QUESTION # 44
You have created a composite report and are trying to add a matrix report as a subreport. However, when trying to configure a Data column, the matrix report is not available to select in the Sub Report Name field.
What can you check to identify the cause of this issue?
- A. Check that the configurations on the Filter Data in Sub Report grid also exist in the Filter tab of the matrix report definition.
- B. Check that the prompt defaults in the matrix report align with the prompt defaults defined in the composite report's Report Settings.
- C. Check that the summarization fields in the matrix report also match the selections in the Field to Aggregate field in the Data column settings.
- D. Check that every field in the composite report's set of fields that are enabled for filtering and grouping also exists as a group-by field in the matrix report.
Answer: D
Explanation:
For a matrix report to be eligible as a subreport in a composite report, Workday requires strict alignment between the composite report's enabled fields and the matrix report's group-by fields. Specifically, every field enabled for filtering and grouping in the composite report must also exist as a group-by field in the matrix report.
If this alignment does not exist, Workday excludes the matrix report from the Sub Report Name selection list because the system cannot reliably aggregate or align the summarized data across reports.
Workday HCM Reporting documentation states:
"When using matrix reports as subreports in composite reports, the group-by fields must align with the composite report's enabled grouping and filtering fields."
"Matrix reports that do not meet grouping alignment requirements will not be available for selection as subreports." The other options do not control subreport eligibility:
Summarization fields affect calculations, not availability.
Filter alignment is validated later, not at selection time.
Prompt defaults do not determine whether a report appears in the Sub Report Name field.
NEW QUESTION # 45
A customer was receiving a report on a weekly basis but has not received it since the new year started.
What task should you use to confirm the report frequency?
- A. Mass Operation Management
- B. Scheduled Future Processes
- C. View Alerts
- D. Run History
Answer: B
Explanation:
When a report is scheduled to run at a recurring interval (daily, weekly, monthly, etc.), Workday tracks this under the Scheduled Future Processes report. This task allows administrators and report owners to view when reports are set to run, the frequency of execution, and the schedule start and end dates. If a report stopped running after the new year began, the most likely cause is that the scheduling end date expired on December 31, meaning no new jobs were generated for the new year.
From the Workday Reporting binder: "Workday provides scheduling options to run reports at set frequencies. You can confirm upcoming scheduled report runs in the Scheduled Future Processes report." This provides visibility into whether the report is still scheduled and when it is next expected to execute.
The other answers are incorrect: View Alerts relates to system notifications, Mass Operation Management is not for reporting, and Run History shows past runs but not future scheduling. The correct option is C. Scheduled Future Processes.
NEW QUESTION # 46
You want to view benefit cost by benefit enrollment for the current year compared to the prior year to evaluate increases or decreases in plan enrollment, displaying formatted cost and count variance calculations.
What type of report would allow you to do this?
- A. Advanced Report
- B. Trending Report
- C. Matrix Report
- D. Composite Report
Answer: B
Explanation:
To evaluate year-over-year changes in benefit costs and enrollments, you need historical data comparisons over time. The Trending Report type is designed for exactly this use case, leveraging data sources like Trended Workers to display snapshots at periodic intervals and calculate variances between time periods.
From the Workday binder: "Trending reports allow you to track changes to worker data across time. These reports support analysis of headcount, demographics, benefit enrollments, and cost variances year-over-year or month-over-month." Advanced and Matrix reports provide strong analysis capabilities, but they are based on current or related effective-dated data, not time-series snapshots. Composite reports combine multiple subreports but do not inherently manage trending data or variance calculations across years.
Therefore, the only correct option for year-over-year benefit enrollment and cost variance is D. Trending Report.
NEW QUESTION # 47
An HR analyst needs to schedule a collection of diversity reports to the HR director on a monthly basis. What mechanism should the HR analyst use to do this?
- A. Embedded analytics
- B. Report bursting
- C. Report groups
- D. Alerts
Answer: C
Explanation:
Report groups allow multiple reports to be bundled together and scheduled as a package to distribute at a set frequency. In this case, the HR analyst can group all diversity-related reports and schedule them to run automatically each month for the HR director.
The Workday documentation explains: "Workday provides additional reporting features such as sharing, scheduling, and exporting reports. Reports can be grouped into report groups for easier scheduling and delivery." .
While Report Bursting is used for distributing a single report with different data slices (e.g., sending each manager their team's results), it is not suited for bundling multiple different reports. Embedded analytics are dashboards, not scheduling tools. Alerts notify users of conditions but do not manage recurring report packages.
Therefore, Report Groups is the correct method for scheduling multiple reports together.
NEW QUESTION # 48
Two people run the same report. One person can view all columns but the other person can only view some columns.
Why is the second user missing columns?
- A. The second user is not the report owner.
- B. The report uses an indexed data source.
- C. The second user does not have access to the domain that secures the field.
- D. The first user did not manually share the report with the second user.
Answer: C
Explanation:
Access to report fields in Workday is governed by security domains. If a user lacks access to the security domain that secures specific report fields, those fields will not appear in the report output for that user.
From the Workday Reporting documentation:
"A security group gets access to a security domain, which is a predefined set of related securable items. Securable items can include reports, tasks, data sources, and report fields." Therefore, the correct answer is C. The second user does not have access to the domain that secures the field.
NEW QUESTION # 49
You need a calculated field that returns whether or not the initiator for a Manage Goals event is the worker's manager.
- A. Evaluate Expression Band
- B. Evaluate Expression
- C. True/False Condition
- D. Lookup Related Value
Answer: C
Explanation:
The True/False Condition calculated field is used to return Boolean results (True or False) based on defined criteria. In this scenario, the field must evaluate whether the event initiator equals the worker's manager. By setting that condition, the calculated field will return True if the initiator is the manager and False otherwise.
From Workday Reporting documentation:
"True/False Condition - Creates a Boolean field that evaluates a condition and returns True or False depending on whether the condition is met." Thus, the correct answer is B. True/False Condition.
NEW QUESTION # 50
......
Actual Questions Answers Pass With Real Workday-Pro-HCM-Reporting Exam Dumps: https://www.testsimulate.com/Workday-Pro-HCM-Reporting-study-materials.html
Pass Your Exam Easily! Workday-Pro-HCM-Reporting Real Question Answers Updated: https://drive.google.com/open?id=1AoKiywAWcYe-P3-NS8VgtdHujQ5B_R0l