Virtualization Technical Support for IBM i -v1 (C4040-121) Free Practice Test

Question 1

A Power 720 system has a VIO Server (VIOS) partition configured completely in the CEO. The VIOS partition hosts IBM i client partitions which require access to the DVD drive in the CEO. How is this accomplished?

A. Use VIOS to map the DVD drive to the IBM i client partition.

B. Create a shared vSOSI link from VIOS to each IBM i client partition and mapthe DVD drive to each partition.

C. Use DLPAR to move the DVD drive between partitions as needed.

D. Create an image catalog in the IBM i client partition and map itto the DVD drive.

Correct Answer: A

Question 2

A customer has several client IBM i partitions, hosted by other IBM i partitions. Corporate IT policy specifies that certain optical and tape resources must not be available to client IBM i partitions. How can these resources be made unavailable to the client partitions?

A. Secure the device descriptions on the hosting partition with an authorization list.

B. Specify only the devices to be available in the Network Server Description.

C. Specify the devices to be unavailable in the Network Server Description.

D. Remove the unneeded hardware from the hosted partition's profile on the HM

Correct Answer: C

Question 3

A client IBM i partition running 6.1 is being upgraded to 7.1 using an image catalog on an IBM i 6.1 partition. The image catalog is loaded into a virtual optical device and made available to the client partition using a Network Server Description and virtual SCSI adapters.
Which statement is correct?

A. The device will show on the client with the same name as on the host.

B. The virtual optical device should be specified in the NWSD before it can be seen by the client partition.

C. The virtual optical device performs as a library in IBM i 6.1.

D. The next volumes will have to be mounted manually, one by one.

Correct Answer: D

Question 4

A POWER7 server is being configured with 1 hosting IBM i partition and 4 client IBM i partitions. All partitions will run IBM i 7.1, TR4. The hosting partition is providing network support to the client partitions and needs both redundancy and best bandwidth.
What connectivity on the host partition will support these requirements?

A. Using two or more physical Ethernet resources configure an aggregated link to the switch and use this for the bridge to the internal vLANs used by the client partitions.

B. Configure two or more Ethernet lines. Create a Virtual IP address for the host partition. Configure Showler routes to the local network for load balancing.

C. Configure two or more Ethernet lines. Use the lines to create redundant bridges to the internal vLANs used by the client partitions.

D. Using two or more physical Ethernet resources configure an aggregated link to the switch and use this for IP address of the host partition.

Correct Answer: A

Question 5

In order to suspend an IBM i partition1 which hardware resources need to be virtualized?

A. All SCSI resources

B. All disk resources

C. All resources

D. All networking resources

Correct Answer: C

Question 6

A small financial institution has a client IBM i 7.1 partition, hosted by a VIO Server, using internal disk. All disk storage is provided by VIOS. Bank policy requires all system and user data on disk to be duplicated.
Which option will satisfy the policy at the lowest cost without impacting performance?

A. Create an iASP, and copy each of the libraries containing the application into the iASP.
UsePowerHA to mirror the iASP and*SYSBAS.

B. Implement a secondVIOServer with its own storage and assign itto the client IBM i partition.
Mirror the drives provided by the firstVIOServer to the drives provided by the secondVIOServer.

C. Add a V7000 SAN with sufficient storage to create two copies of the storage, and use a
singleVIOServer to replicate the storage.

D. Create two iASP5 with disk compression enabled.
Move the application into the first iASP and mirror it to the second iASP with 5770-SS1 HA
Switchable Resources.

Correct Answer: B

Question 7

Disk from a fibre-attached V7000 disk subsystem will be used for an IBM i partition. What type of adapter is required in the IBM i partition?

A. Virtual SAS adapter

B. Virtual SCSI adapter

C. SAS disk adapter

D. Fibre Channel adapter

Correct Answer: B

Question 8

The DSPFMWSTS on an IBM i 7.1 partition appears as shown:

As part of troubleshooting, IBM support asks that level AL730_087 be deactivated.
How is that accomplished?

A. Stop all partitions Change the managed system to start in "P" mode Restart the managed system From the HMC, select Updates

B. On the resulting screen, select the managed system Under Tasks select Change Licensed Internal Code for Current Release In the wizard select Deactivate Temporary Level

C. Run command RMVPTF LICPGM(5770SS1) SELECT(MH01310) DELAYED(*YES), then restart the partition

D. Run command DLTPTF PTF(MH01310) RMV(*TEMP)

Correct Answer: A

Question 9

A customer wants two VIO Servers in the CEO of a proposed Power 720. To provide redundancy for the IBM V7000 SAN they will utilize to provision disk for his client partitions.
What is the minimum required to make this possible?

A. An 8-disk storage backplane and the split drive bay feature

B. A 6-disk storage backplane and the split drive bay feature

C. A 6-disk storage backplane

D. An 8-disk storage backplane

Correct Answer: B

Question 10

A customer is implementing a new POWER7 system that will run along with an older POWER5 system.
A new HMC has been purchased for the POWER7 system.
The older 7310-CR3 HMC for the POWER5 system will remain in service.
The customer wants the older 7310-CR3 provide back up to the new HMC.
What must be done prior to implementing the customer's requirements?

A. Connect the new HMC to the POWER7 system and to the LAN.
Use the "Transmit Service Information"dialog on the new HMC to update the 7310-CR3 with the
new HMC code and firmware for the FSP.
Update the firmware on the POWER5 system and connect the new HMC.

B. Ensurethe POWER7 ESP is running in "Dual Mode"with the"Activated Level"setto supportthe
POWER7 system and the "Deferred Level"set to support the POWER5 system.
Connect the 731 O-CR3 with the "Deferred Level"password.

C. Upgrade the POWER5 system firmware to the same fix pack level that the POWER7 system is
running. Upgrade the 7310-CR3 to the latest version of HMC code.
Connect both systems normally to the 7310-CR3

D. Consult the HMC / Firmware Supported Combinations chart to obtain the proper firmware/HMC
code levelsimplementthe firmware updates on the POWER5 and 7310-CR3 HMC first,
Connectthe 7310-CR3 to the POWER7 system.

Correct Answer: D

Welcome to TestSimulate

IBM Virtualization Technical Support for IBM i -v1 (C4040-121) Free Practice Test