Specialist - Implementation Engineer, PowerEdge MX Modular Exam (DES-4421) Free Practice Test

Question 1

After installing a supported OS from a bootable ISO on an MX740c sled, an administrator discovers that not all the hardware is property detected by the OS. They plan to reinstall the OS.
What should the administrator do to resolve this issue through OS installation?

A. Modify the bootable ISO to remove faulty drivers and use the OS deployment feature

B. Update the Dell OS Driver Pack and boot directly from the bootable ISO

C. Update the Dell OS Driver Pack and use the OS Deployment feature

D. Modify the bootable ISO to remove faulty drivers and boot directly from the bootable ISO

Correct Answer: B

Question 2

When performing "A1 the Box" management, what must be done to successfully connect to the Management Module?

A. Connect cables to the KVM

B. Change the baud rate to 128000

C. Attach standard A-to-A USB cable to a laptop

D. Configure PuTTY for a serial connection

Correct Answer: D

Question 3

A technician replaces a failed Management Module in an MX7000 chassis group. After the technician leaves the site, the administrator reports that the lead chassis is no longer able to communicate with its members.
How can OME-M be used to confirm the cabling configuration?

A. View the topology map from the Group Lead

B. View the health status of the lead Chassis Management Module

C. View the I/O module topology map from the lead chassis

D. View the health status of the lead Chassis Management ports

Correct Answer: D

Question 4

Which feature requires an iDRAC Enterprise license for an MX sled?

A. iDRAC Service Module

B. Last Crash Screen

C. Storage Management

D. Group Manager

Correct Answer: D

Question 5

Which controller option the mapping of an entire MX5016s to multiple compute sleds?

A. HBA330 only

B. PERC H730 only

C. HBA330 and PERC H730

D. H745 Jumbo PERC

Correct Answer: A

Question 6

In the assigned mapping of the MX5016s storage sled what is an assignment option used for independent storage to be mapped to a compute sled?

A. Drive-assigned enables the MX5016s to be split among multiple compute sleds. Each compute node only "sees" the disks that are assigned to it and not the others.

B. Drive-assigned enables the MXG610s to the first eight drives in the MX5016s.

C. Enclosure-assigned enables the MXG610s to the first eight drives in the MX5016s.

D. Enclosure-assigned enables the MX5016 to be split among multiple compute sleds. Each compute node only "sees" the disks that are assigned to it and not the others.

Correct Answer: A

Welcome to TestSimulate

EMC Specialist - Implementation Engineer, PowerEdge MX Modular (DES-4421) Free Practice Test