A. Grubbing

B. Clearing

C. Stripping

D. Swelling

A. Blue

B. Red

C. C

D. company

A. Noise level exceeds 85 dba over an 8 hour period. INGAA states during pressure testing to keep under 80 dba,s

B. Area where the edge of the disturbance is within 25, of centerline of existing facilities

C. To remedy threats to human health and the environment from unexpected releases and historical mistakes in hazardous waste management

D. Rock=90 deg. or vertical 2. Type A=3/4:1 or 53 deg. 3. Type B=1.1 or 45 de. 4. Type C= 1 1/2:1 or 34 deg.

A. Each side of a water crossing that is more than 100, wide from high water mark to high water mark. Unless the Administrator finds they are not justified.

B. To remedy threats to human health and the environment from unexpected releases and historical mistakes in hazardous waste management

C. Area within 24" of facilities or the distance mandated by state law, whichever is greater. NOTE: CGA & INGAA says 18".

D. 1. Survey 2. Clearing and grading 3. Stockpiling and stringing 4. Field bending 5. Ditching and excavation 6. Welding 7. Coating 8. Lowering In. 9. Backfilling 10. Cathodic Protection 11. Hydrostatic testing 12. Clean up and restoration

A. grading

B. permits and precautions

C. tide water chanels/basins

D. sediment barriers

A. OSHA 1910.146 (29 CFR 1910) occupational safety and health standard

B. OSHA 1910.147 (29 CFR 1910) occupational safety and health standard

C. a) an operator digging a trench for excavation of foreign utilities

D. A spike test, strength test and/or a leak test(API 1110, 4.1.3 a)

A. Quality assurance includes sales activities focused on providing confidence that quality requirements are consistently fulfilled. Inspectors are expected to be the principal means.

B. The company( API 1104 7.5)

C. The crossing company

D. The contractor(API 1169 5.2.3)

A. Crossing Company

B. Cognitive Learning

C. Classical Condition

D. Positive Response

A. 80%

B. 50%

C. 90%

D. 100%

A. cohesive

B. granular

C. thin

D. stress corrosion cracking

A. Protractor, Measuring tape, Center Finder, Straight edge.

B. Gouges, buckles, wrinkles, ripples or ovality,s

C. Crossing plan

D. Grading

A. Regulation Transportation of Natural and Other Gas by Pipeline

B. Class 2 liquids having a flash point above 100 deg F. Diesel, jet fuel motor oil

C. Regulates how wastes should be managed to avoid potential threats to human health and environment

D. gouges, buckles, wrinkles, ripples or ovality,s

A. Do Not

B. Does not

C. 100 Ft

D. One year