IBM PureFlex Technical Expert V1 (000-784) Free Practice Test

Question 1

Given this MSP's desire for rapid deployment of additional capacity, the sales team chose to lead with a PureFlex solution; however, in the interest of keeping costs down, they chose to propose a PureFlex Express configuration. For high availability, they added a second IBM Flex System Fabric EN4093R 10Gb Scalable Switch. Each PureFlex configuration comes with at least four 1000Base-T SFP RJ45 Transceivers that are used to connect the CMMs and (if present) the Storwize V7000 management ports to the EN4093R switch in the chassis. What simple change can be made after installation to simplify the connectivity and improve management network availability without adding additional cost?

A. Completely eliminate the use of the 1000Base-T SFP RJ45 Transceivers by routing management traffic across a separate VLAN on theproduction network links

B. Separate each of the CMM and Storwize V7000 management ports so that they are divided across the two available EN4093R switches

C. Leverage two more 1000Base-T SFP RJ45 Transceivers for redundant connectivity to the client management network

D. Connect CMM and (if present) the Storwize V7000 management ports directly to the client management network

Correct Answer: D

Question 2

The client has three independent redundant SAN fabrics: One for development, one for validation and one for production. The client will use a chassis with x240 nodes to connect these SAN fabrics. What is the best solution for the client?

A. Use two CN4058 adapters and two CN4093 switches, each with two FoD enhancements

B. Use two CN4054 adapters and two EN4093 switches, each with two FoD enhancements

C. Use two CN4058 adapters and four EN4093 switches, each with one FoD enhancement

D. Use one CN4054 adapter, LOM, and four CN4093 switches with FoD enhancements throughout

Correct Answer: D

Question 3

Which I/O modules can support end-to-end FCoE between a compute node with a CN4054 10Gb Adapter (with the FCoE upgrade) and an IBM Flex System V7000 Storage Node?

A. Any IBM Fibre Channel I/O module

B. Any IBM 10Gb Ethernet I/O module

C. Only the CN4093

D. Only the EN4093R

Correct Answer: C

Question 4

A prospective client is very interested in the IBM Flex System, and they want to standardize on the x240. The client is very concerned with tape back-up and needs to keep Internet traffic, tape traffic, and disk traffic on separate physical adapters. How can this be achieved?

A. Add a redundant CN4093 switch

B. Add a PCIe expansion node

C. Add a redundant Fibre Channel switch

D. Add a storage expansion node

Correct Answer: B

Question 5

In a Flex System solution, what is most likely to prevent the cloud enablement of PowerVM workloads when leveraging SmartCloud Entry?

A. Compatibility with third party storage

B. Integration with Cisco networking

C. Sub-capacity licensing for Oracle

D. Support for Oracle workloads

Correct Answer: A

Question 6

Exhibit:

The client has a strong skill base/interest in a Linux RHEL-based virtualized solution. One of their key requirements is to be able to quickly provision new compute nodes. Which PureFlex systems management capability should be highlighted to them?

A. Multiple hypervisor management

B. Relocation of virtual machines based upon PFA events

C. Capture and redeployment of virtual machines

D. Bare-metal OS deployment

Correct Answer: D

Question 7

A client is adding a fifth chassis to their IBM PureFlex System. They are running Flex System Manager version 1.2.x. What is required for the fifth chassis to be added? Cost is a concern.

A. Upgrade the FSM to version 1.3 or later and add the fifth chassis to the current FSM

B. Add the fifth chassis to the current FSM

C. Add a new FSM as a second management environment and connect the fifth chassis to it

D. Upgrade the FSM to version 1.3 and add a new FSM to the same management environment; connect the fifth chassis to the second FSM

Correct Answer: A

Welcome to TestSimulate

IBM PureFlex Technical Expert V1 (000-784) Free Practice Test