HPE Network Switching Associate Exam (HPE6-A86) Free Practice Test

Question 1

The HPE Aruba Networking Fabric Composer is being proposed to manage existing CX switches in a customer environment. Which protocol does the AFC use to communicate with the switches?

A. API

B. SSH

C. SNMPv3

D. Telnet

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 2

A Windows PC is not able to browse the Internet. Based on the output, what could be the problem?

A. There is no VLAN tag configured on the PC.

B. The wrong subnet mask has been configured.

C. The port has been error-disabled by STP.

D. A static route must be configured on the PC.

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Users report poor performance when uploading files to their document management server in the same subnet. You suspect packet loss is causing the problem. Which tool in HPE Aruba Networking Central can you use to confirm this?

A. Commands - show interface error-statistics

B. Network Check - Traceroute

C. Network Check - Ping

D. Device Check - Cable Test

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 4

Based on the example below:

How is the VSF integrity verified if the VSF links between members 1 and 3 + 2 and 3 are disconnected?

A. The management port is used for multi-active detection.

B. The VSF has been configured with no split, and remains operational on member.

C. The peer-switch-based detection will be used.

D. The VSF will detect a split when the topology: ring changes to chain .

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 5

How many collision domains are shown in the diagram below?

A. 3

B. 6

C. 1

D. 2

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 6

A four-member CX 6200F VSF configuration is being planned to replace the current 5412R switch. The customer has an open-source network management solution and requires an answer to how they can monitor the switch stack.

A. The SNMP service must be enabled on mgmt VRF for each VSF member for queries.

B. The SNMP service on the Conductor switch will respond to all SNMP queries for the stack.

C. The SNMP service will respond to queries and stack them on both Conductor and Standby members.

D. The SNMP service will be enabled by default for each members OOBM port for queries.

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 7

Refer to the exhibit:

What information is provided based on this output?

A. The switch does not have a valid support contract.

B. HPE Aruba Networking Central has been manually disabled on the switch.

C. The switch does not have management VRF defined for connectivity.

D. HPE Aruba Networking Central configuration is in the factory default.

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 8

A company recently deployed an Aruba switch and configured Link Aggregation Control Protocol (LACP) between two switches to improve bandwidth and redundancy. However, some links are not forwarding traffic, and network performance has decreased. Which troubleshooting step should the administrator perform first?

A. Increase the MTU size on the affected ports

B. Verify that both switches are running the same STP version

C. Check that LACP is enabled on both ends of the link

D. Configure static routes between the two switches

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 9

How can an administrator verify that an Aruba switch is forwarding traffic correctly?

A. show vlan

B. show interfaces

C. show ip route

D. show running-config

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 10

You are discussing a solution for a three-tier hierarchy with HPE Aruba Networking CX switches with a customer. Which statement matches this design?

A. Campus networks often adopt this design.

B. The main advantage is simplicity.

C. It is a cost-effective way to create a network.

D. Small enterprise networks often adopt this design.

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Welcome to TestSimulate

HPE Network Switching Associate (HPE6-A86) Free Practice Test