We have introduced too much details about our 300-110 test simulates: Designing Cisco Wireless Networks on the other page about Self Test Software & Online Enging. If learners are interested in our 300-110 study guide and hard to distinguish, we are pleased to tell you alone. Below we will focus on your benefits if you become our users.

Firstly, we want to stress that our 300-110 test simulates: Designing Cisco Wireless Networks are valid as we are researching Cisco exams many years. Most our experts are experienced and familiar with the real questions in past ten years. We know the key knowledge materials about 300-110 exam so that we can always compile valid exam study guide. We are skilled at Cisco exams with so many years' development. We have stable & high passing rate for Cisco exams recent years. If you pay attention on our exam study guide after purchasing, you should not worry too much, our products will assist you to clear exam easily. We will assist you to prepare well until you pass exam.

DOWNLOAD DEMO

Secondly, our products are high-quality. Our value is obvious to all:
1. PDF version of 300-110 study guide is available for you to print out and note your studying thoughts on paper. Self Test Software and Online Enging of 300-110 study guide have simulation functions which is not only easy for you to master our questions and answers better but also make you familiar with exam mood so that you will be confident.
2. Our 300-110 test simulates materials make you do sharp and better target preparation for your real exam. This ways will cut off your preparation time. Your learning will be proficient.
3. One-shot pass with help of our 300-110 test simulates materials will make you save a lot of time and energy. As exam fee is expensive, you may not want to pay twice or more.
4. 365 Days Free Updates Download: you will not miss our valid 300-110 study guide, and also you don't have to worry about your exam plan. One year is enough for you to do everything.

Thirdly, About Payment & Refund: we only support Credit Card for most countries. Our purchasing procedure of 300-110 test simulates materials is surely safe. If you find any unusual or extra tax & fee please contact us soon. Our promise is "Money Back Guaranteed". Please rest assured. We are legal authoritative company. If you fail exam unluckily and apply for refund, we will refund to you soon. You are not allowed to waste one penny on useless products.

Fourthly, About Discount: as we put into much money on information resources and R&D, all our experts are highly educated and skilled so that our 300-110 test simulates materials receive recognition with its high pass-rate from peers and users. Our price is really reasonable. If you really want some discount, you can pay attention on holiday activities. Or if you are regular customers and introduce our 300-110 study guide to others we will give you some discount.

Cisco Designing Cisco Wireless Networks Sample Questions:

1. An engineer is deploying new APs to serve IEEE 802.11g through 802.11ac clients and wants to use the Ekahau Site Survey tool to verify RF coverage. Management wants the engineer to verify and create coverage maps as quickly as possible. Which configuration accomplishes the goal?

A) active mode with one wireless adapter
B) passive mode with one wireless adapter
C) passive mode with two wireless adapters
D) active mode with two wireless adapters

2. A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?

A) Configure WLC-A and WLC-B in a high-availability cluster and set a mobility MAC address.
B) Create a mobility tunnel between WLC-A and WLC-B with the same group name.
C) Implement AP groups for each building by using the same name on WLC-A and WLC-B.
D) Connect WLC-A and WLC-B by using the redundancy port to sync client sessions.

3. The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco
8821 phones. Which two settings accomplish this goal? (Choose two.)

A) Use AVC to tag traffic voice traffic as best effort.
B) Use Cisco Centralized Key Management for authentication.
C) Configure AP groups between WLCs.
D) Configure AVC profile on new SSID.
E) Configure mobility groups between WLCs.

4. An engineer is implementing a wireless design for a manufacturing company with a Catalyst 9800, a stack of two Catalyst 9300-48HX switches, and 9166 APs. Each AP must be named using the Zone-053424189-01X string where X is the area number. The engineer needs to connect the APs to the switch stack using PoE. How many APs must the engineer connect to the stack so that they run with full functionality?

A) all ports on switch 1 of the stack
B) half of the ports on each switch
C) half the ports on switch 2 of the stack
D) all ports on all the switches

5. A retail customer opened two new branch locations, and the main store HQ handles data center operations.
Each branch location has three Cisco Catalyst 9130 APs. The data center has a Catalyst 9800 WLC with 18 Catalyst 9130 APs. Growing business and poor WAN uplinks cause impacted branch AP and wireless client connectivity back to HQ, and each branch location is now planned to have its own EWC controller based on C9130 AP to keep traffic local. This new design must accommodate: guests and employees sharing the same WLAN with different VLANs, guest uplink and downlink traffic restricted to 2 Mbps, and each branch acting as secondary or tertiary backup to another branch with the data center WLC always being the primary. Which design approach should the consulting engineer take?

A) One C9130 branch AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as N+1 backup. The branch guest WLAN will use local web auth on guest VLAN.
B) Two C9130 branch APs must be converted to EWC mode, one for the active controller and the other for standby, with the standby EWC set as N+1 backup. HQ AAA must be added to EWC, and WLAN with dot1x + AAA override must be configured.
C) Two C9130 branch APs must be converted to EWC mode, one for the active controller and the other for standby, with HQ WLC set as a primary N+1 backup, and other branches ' EWC must be added as mobility peers. The branch WLAN will use the guest anchor to HQ WLC for guest VLAN access.
D) One C9130 branch AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as a primary N+1 backup and other branches ' EWC AP as secondary and tertiary.
HQ AAA must be added to EWC, and WLAN with MAB + AAA override must be configured.

Solutions: