EMC Dell PowerEdge Operate 2023 (D-PE-OE-23) Free Practice Test
Question 1
Which AMD powered server supports dual CPU. 16G, and iDRAC Express?
Correct Answer: D
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 2
A server is experiencing latency issues, and the end user was told to disable C States and C1E.
Where can these settings be checked in the BIOS?
Where can these settings be checked in the BIOS?
Correct Answer: A
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 3
Using the iDRAC UI, generate and save locally a SupportAssist collection with system information and debug logs only.
Correct Answer:
See the Explanation for Step by Step solution.
Explanation:
To generate and save a SupportAssist collection with system information and debug logs only in the iDRAC UI, follow these steps:
Step-by-Step Guide:
* Access SupportAssist in iDRAC:
* In the iDRAC interface, navigate to the Maintenance tab in the top menu.
* From the dropdown, select SupportAssist. This will bring up the SupportAssist options.
* Initiate a Collection:
* In the SupportAssist section, look for the option to Create a New Collection or Start a Collection.
* Choose Collect System Data or Generate a Collection, depending on the version of iDRAC.
* Select Collection Components:
* When prompted to select components for the collection, check the boxes for System Information and Debug Logs only.
* Ensure no other components are selected to limit the collection to just the required data.
* Start the Collection:
* Confirm your selection, then click Start or Generate. This will initiate the process to gather the specified data from the system.
* Save the Collection Locally:
* Once the collection is complete, you should see an option to Download or Save the file.
* Click the download link and save the collection file locally on your computer.
* Verify the Collection File:
* Check the downloaded file to ensure it contains only the system information and debug logs. It should be in a format such as ZIP or TAR, depending on the system configuration.
By following these steps, you can successfully generate a SupportAssist collection with just the system information and debug logs and save it to your local system for further review or support purposes.
Explanation:
To generate and save a SupportAssist collection with system information and debug logs only in the iDRAC UI, follow these steps:
Step-by-Step Guide:
* Access SupportAssist in iDRAC:
* In the iDRAC interface, navigate to the Maintenance tab in the top menu.
* From the dropdown, select SupportAssist. This will bring up the SupportAssist options.
* Initiate a Collection:
* In the SupportAssist section, look for the option to Create a New Collection or Start a Collection.
* Choose Collect System Data or Generate a Collection, depending on the version of iDRAC.
* Select Collection Components:
* When prompted to select components for the collection, check the boxes for System Information and Debug Logs only.
* Ensure no other components are selected to limit the collection to just the required data.
* Start the Collection:
* Confirm your selection, then click Start or Generate. This will initiate the process to gather the specified data from the system.
* Save the Collection Locally:
* Once the collection is complete, you should see an option to Download or Save the file.
* Click the download link and save the collection file locally on your computer.
* Verify the Collection File:
* Check the downloaded file to ensure it contains only the system information and debug logs. It should be in a format such as ZIP or TAR, depending on the system configuration.
By following these steps, you can successfully generate a SupportAssist collection with just the system information and debug logs and save it to your local system for further review or support purposes.
Question 4
Which three tools for advanced server management and servicing at-the-box are provided with iDRAC Direct?
(Select 3)
(Select 3)
Correct Answer: B,D,E
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).
Question 5
An administrator has been tasked to create and save replacement of a server configuration with the file name of "PE-server".
The profile must include the configuration for only the following components:
. NIC
. RAID
. iDRAC
Using the simulator, create and save the replacement with these components.
The profile must include the configuration for only the following components:
. NIC
. RAID
. iDRAC
Using the simulator, create and save the replacement with these components.
Correct Answer:
See the Explanation for Step by Step solution.
Explanation:
To create and save a server configuration profile with specific components in the iDRAC interface, follow these steps:
Step-by-Step Guide:
* Access Configuration Profiles:
* Go to the "Configuration" tab on the top menu bar.
* From the dropdown options, select "Server Configuration Profile."
* Create a New Profile:
* Within the Server Configuration Profile section, choose the option to Create a New Profile.
* You will likely see options to specify which components to include in the configuration profile.
* Select Components:
* When prompted, select only the components required for the configuration:
* NIC: Network Interface Card settings.
* RAID: Storage controller and RAID configuration.
* iDRAC: iDRAC management settings.
* Ensure that other components are not selected to meet the requirement.
* Save the Configuration:
* Enter the file name "PE-server" for the profile.
* Choose the option to Save or Export the configuration profile. This should save the configuration to the specified name, typically on the server or local storage available through iDRAC.
* Verify the Profile Creation:
* After saving, verify that the profile appears in the list of server configuration profiles with the name "PE-server."
* Confirm that it includes only the selected components.
By following these steps, you should successfully create and save the configuration profile with the specified components.
Explanation:
To create and save a server configuration profile with specific components in the iDRAC interface, follow these steps:
Step-by-Step Guide:
* Access Configuration Profiles:
* Go to the "Configuration" tab on the top menu bar.
* From the dropdown options, select "Server Configuration Profile."
* Create a New Profile:
* Within the Server Configuration Profile section, choose the option to Create a New Profile.
* You will likely see options to specify which components to include in the configuration profile.
* Select Components:
* When prompted, select only the components required for the configuration:
* NIC: Network Interface Card settings.
* RAID: Storage controller and RAID configuration.
* iDRAC: iDRAC management settings.
* Ensure that other components are not selected to meet the requirement.
* Save the Configuration:
* Enter the file name "PE-server" for the profile.
* Choose the option to Save or Export the configuration profile. This should save the configuration to the specified name, typically on the server or local storage available through iDRAC.
* Verify the Profile Creation:
* After saving, verify that the profile appears in the list of server configuration profiles with the name "PE-server."
* Confirm that it includes only the selected components.
By following these steps, you should successfully create and save the configuration profile with the specified components.
Question 6
What IP address does an administrator connect to the iDRAC Direct USB port?
Correct Answer: D
Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).