A. Destination interface can be a physical port

B. Source and destination interfaces can be on different hosts

C. Destination vEthernet interface can be on a different VLAN than the source

D. Destination interface cannot be a physical port

E. Source and destination interface must be on the same host

A. GLBP

B. IRDP

C. HSRP

D. VRRP

A. control, management, and packet

B. management, packet, and VSM

C. Layer 2, Layer 3, and keepalive

D. management, Layer 2, and Layer 3

A. The converged network adapters are compatible only with Cisco UCS.

B. The converged network adapter is a virtualized multifunction adapter that combines the functions of Ethernet NICs and iSCSI on the same card.

C. The converged network adapter is a multifunction adapter that works with multiple network speeds and duplex settings, and it supports several storage and network protocols.

D. The converged network adapter is a multifunction adapter that combines the functions of Ethernet NICs and Fibre Channel host bus adapters.

A. The command does not have an effect unless you configure "debug enable".

B. The outputs of the debug are redirected to the logging buffer.

C. The outputs of the debug are redirected on file test on the "log." directory.

D. If you are on a console connection, the outputs are shown after the event occurs.

A. Any user can acknowledge the reload

B. Those service profiles have a user acknowledge maintenance policy configured.

C. If you check Acknowledge All and click Apply, the blades reload.

D. Chassis 1 in blade 2 has a major fault.

A. STP is misconfigured. The root guard must be disabled.

B. An inferior BPDU was received on a Cisco FabricPath edge port.

C. A superior BPDU was received on a Cisco FabricPath edge port.

D. Spanning tree must be disabled, and the message indicates that STP is enabled.

A. Class 2 acknowledges frame delivery.

B. Fibre Channel Class 2 provides a connection-oriented class of service.

C. Dedicated bandwidth is allocated when using Class 2.

D. The F_BSY frame is part of Class 2.

E. BB_Credits do not exist in Class 2.

A. The principal switch remains the same.

B. The switch name is changed.

C. New Fibre Channel domains can be allocated.

D. Zone merging is reinitiated.

E. All traffic in all VSANs is suspended.

A. The save command will save the commands entered to the startup configuration.

B. The network administrator can perform a dry-run ACL configuration by verifying the configuration against the hardware and software resources available before applying it.

C. Configuration sessions can be saved and resumed at any time, even after upgrading NX-OS Software on the switch with ISSU.

D. Configuration sessions are global for all VDCs on the Nexus 7000.

E. The verify command will validate commands entered for syntax errors.

A. Each DCNM-LAN server will have the same device credentials.

B. DCNM-LAN server users are local to the DCNM-LAN server.

C. DCNM-LAN only supports TACACS+.

D. If none of the authentication servers that are configured for the current authentication mode responds to an authentication request, the DCNM-LAN server falls back to local authentication.

E. Administering DCNM-LAN authentication settings require an authentication license.

A. Service virtual machine only snoops the data and is used for monitoring purposes.

B. The show virtualservice_domainname command displays the configurations for this VSD port profile.

C. Any traffic coming or going out of the VSD must go through the service virtual machine.

D. A virtual service domain (VSD) allows you to classify and separate traffic for network services.

E. A VSD is collection of interfaces that are guarded by the service virtual machine.

F. vMotion is supported for the service virtual machine and should not be disabled.