Aruba Certified Switching Professional Exam (HPE6-A45) Free Practice Test

Question 1

Refer to the exhibit.

The network administrator enables DHCP snooping globally and on VLAN 2. An additional step is mandatory for DHCP snooping to operate correctly and for clients to receive DHCP settings.
What is the additional mandatory step?

A. Define an authorized DHCP server.

B. Enable ARP protection.

C. Define trk1 as a trusted DHCP port.

D. Define edge ports as untrusted DHCP ports.

Correct Answer: D

Question 2

The security policy for a company requires that switches use SNMPv3 and accept all read-only SNMPv2c messages. The network administrator enables SNMPv3. Which additional action should the network administrator take to comply with this policy?

A. Disable SNMPv1/v2c.

B. Enable SNMPv3 only operation.

C. Disabled SNMPv3 inform timeouts.

D. Enable SNMPv3 restricted mode.

Correct Answer: D

Question 3

Refer to the exhibit.

Endpoints in VLAN 2 connect directly to this switch. These devices should only be able to send DHCP, DNS, HTTP, and HTTPS traffic. However, they are able to send any traffic. Based on the exhibit, what is the issue?

A. The ACL lacks a deny ip any any statement at the end.

B. The switch does not have an IP address on VLAN 2.

C. The name of the ACL applied to VLAN 2 is incorrect.

D. The ACL is applied in the wrong direction.

Correct Answer: C

Question 4

Which technologies can prevent split brain in a VSF fabric that includes Aruba 2930F switches?

A. LLDP MAD or VLAN MAD

B. ARP MAD or OOBM MAD

C. VLAN MAD or ARP MAD

D. OOBM MAD or LLDP MAD

Correct Answer: A

Question 5

A company has a wireless Aruba solution and wired users that connect to AOS-Switches. The company wants deep insight into the types of applications that wired users run. The company also wants more control over the traffic.
What can the company do to meet these goals?

A. Configure RMON receivers on the switches.

B. Set up remote traffic mirroring between the AOS-Switches and Aruba Mobility Controllers.

C. Use tunneled node to send traffic through an Aruba Mobility Controller

D. Configure extended IP ACLs on the AOS-Switches to filter the traffic.

Correct Answer: C

Question 6

OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system.
The administrator also needs the router ID to be stable and available, even if some links on the switch fail.
What should the administrator do?

A. Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface

B. Configure 10.0.0.1 as a secondary IP address on the switch OOBM port

C. Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID

D. Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system

Correct Answer: A

Question 7

What is a reason to implement PIM-DM as opposed to PIM-SM?

A. to control exactly which multicast groups are routed through the network

B. to conserve bandwidth over WAN links

C. to use on high-bandwidth routed connections

D. to permit a higher density of RP routers in the network core

Correct Answer: C

Question 8

An AOS-Switch needs to be configured to support tunneled node in role-based mode. The Mobility Controller administrators tell the switch administrators that the AOS-Switch will integrate with a cluster of Mobility Controllers. The cluster virtual IP address is 10.1.1.10.
How should switch administrator integrate the AOS-Switch with the cluster?

A. Configure the virtual IP address for the primary tunneled-node-server and an actual controller IP address for the backup tunneled-node-server in order to receive redundancy.

B. Double-check the settings with the Mobility Controller administrators because the planned configuration is incomplete with the switch settings.

C. Configure the virtual IP address as the tunneled-node-server address, tunneled node will work, but the clustering features will not provide redundancy.

D. Configure the virtual IP address as the tunneled-node-server address. The switch will automatically learn controller IP addresses to which to tunnel various traffic.

Correct Answer: C

Welcome to TestSimulate

HP Aruba Certified Switching Professional (HPE6-A45) Free Practice Test