Implementing Cisco Enterprise Wireless Networks (300-430) Free Practice Test

Question 1

An administrator is querying the Cisco CMX server through REST API for active client data to build an application. Cisco CMX supports the use of version 3 of REST API to query for active clients in the network. While testing to retrieve information using the API, no results are received.
Which configuration is required for authentication against the API?

A. cmxos apiserver user add

B. cmxctl apiserver user add

C. cmxctl v3 apiserver user add

D. cmxos v3 apiserver user add

Correct Answer: A

Question 2

A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?

A. SNMP

B. SOAP/XML

C. NMSP

D. CAPWAP

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 3

Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?

A. RF Profile

B. AP Join Profile

C. Policy Profile

D. Flex Profile

Correct Answer: D

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 4

Refer to the exhibit. A university network administrator notices that wireless guest users consume a significant amount of uplink internet bandwidth in the library, which causes throughput issues on staff SSID. To throttle this bandwidth use, the administrator intends to configure a QoS policy for guests that:
- remarks DSCP 46 to 34
- drops Netflix and YouTube traffic
- rate limits a host specified in an ACL to 50 Kbps
- rate limits all other traffic to 100 Kbps
Which class-map configuration must the administrator implement?

A.

B.

C.

D.

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 5

A network administrator managing a Cisco Catalyst 9800 WLC must place all iOS connected devices to the guest SSID on VLAN 101. The rest of the clients must connect on VLAN 102 to distribute load across subnets. To achieve this configuration, the administrator configures a local policy on the WLC. Which two configurations are required? (Choose two.)

A. Add local profiling policy under global security policy settings

B. Enable device classification on global wireless settings.

C. Allow HTTP and DHCP profiling under policy map.

D. Assign a policy map under global security policy settings.

E. Create a service template

Correct Answer: B,E

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 6

A network is set up to support wired and wireless clients. Both types must authenticate using
802.1X before connecting to the network. Different types of client authentication must be separated on a Cisco ISE deployment. Which two configuration items achieve this task? (Choose two.)

A. policy results

B. policy sets

C. policy groups

D. device profiles

E. separate networks

Correct Answer: B,C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 7

An engineer set up a VoWLAN with QoS on the WLC and a class map on the switch, but the markings are not being preserved correctly in the end-to-end traffic flow. Which two configurations on the wired network ensure end-to-end QoS? (Choose two.)

A. policy maps

B. QoS licenses

C. NetFlow

D. access lists

E. trust boundaries

Correct Answer: A,E

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 8

A network administrator managing a Cisco Catalyst 9800 WLC must place all iOS connected devices to the guest SSID on VLAN 101. The rest of the clients must connect on VLAN 102 distribute load across subnets. To achieve this configuration, the administrator configures a local policy on the WLC. Which two configurations are required? (Choose two.)

A. Enable device classification on global wireless settings.

B. Create a service template.

C. Add local profiling policy under global security policy settings.

D. Allow HTTP and DHCP profiling under policy map.

E. Assign a policy map under global security policy settings.

Correct Answer: A,B

Question 9

An engineer configures a deployment to support:
- Cisco CMX
- licenses for at least 3000 APs
- 6000 wIPS licenses
The Cisco vMSE appliance must be sized for this deployment. Which Cisco vMSE Release 8 option must the engineer deploy?

A. Low-End vMSE

B. High-End vMSE

C. Standard vMSE

D. Large vMSE

Correct Answer: B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 10

An enterprise started using WebEx as a virtual meeting solution. There is a concern that the existing wireless network will not be able to support the increased amount of traffic as a result of using WebEx. An engineer needs to remark the QoS value for this application to ensure high quality in meetings. What must be implemented to accomplish this task?

A. QoS preferred call index

B. WLAN quality of service profile

C. AVC profiles

D. UP to DSCP map

Correct Answer: C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 11

A customer is deploying Cisco Catalyst Center (formerly DNA Center) to manage a Cisco Catalyst 9800 Series Wireless Controller. Cisco CleanAir is used to address wireless interference. Which two configurations must be completed from the Cisco Catalyst Center GUI to manage the interferes? (Choose two.)

A. The CleanAir configuration model must be applied to a wireless network profile.

B. Configure the RX SOP threshold to be high.

C. Enable CleanAir Device Reporting in the CleanAir configuration model.

D. Enable Neighbor List Dual Band on the configured WLANs.

E. Disable Persistent Device Propagation in the CleanAir configuration model.

Correct Answer: A,C

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 12

An engineer must configure MSE to provide guests access using social media authentication.
Which service does the engineer configure so that guests use Facebook credentials to authenticate?

A. Social Connect

B. Client Connect

C. Visitor Connect

D. Guest Connect

Correct Answer: A

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 13

An administrator receives reports of many interferers in the wireless network and wants to get the location of these interferers from the maps in Cisco Prime Infrastructure. When looking at the floor plans/maps, the administrator does not see any interferers, but can see all wireless clients located successfully. Which two statements define the cause of the issue? (Choose two.)

A. Interferer tracking is not enabled on the MSE.

B. MSE is not added to Cisco Prime infrastructure and synchronized.

C. SNMP between Cisco Prime Infrastructure and the WLC is failing.

D. Context Aware Service tracking limit has already been reached with tracking other elements.

E. NSMP communication is inactive with the WLC.

Correct Answer: A,B

Explanation: Only visible for TestSimulate members. You can sign-up / login (it's free).

Question 14

Refer to the exhibit. An administrator sees interferers that cause connectivity issues in the
2.4GHz band. The DCA cycle on the Cisco Catalyst 9800 Series wireless controller runs every six hours for this band. The RF environment is dynamic on that floor, so the APs must change channels when a certain level of interference is detected. Which feature should be enabled to manage the interference?

A. Unclassified interference

B. Event-Driven RRM

C. Air Quality Alarms

D. Interference Device Alarms

Correct Answer: B

Welcome to TestSimulate

Cisco Implementing Cisco Enterprise Wireless Networks (300-430) Free Practice Test